BMW Used Transmission Swap Programming ZF 6HP 8HP DCT

BMW ZF-8HP70
This service provides reprogramming of BMW used transmission to your vehicle.
Price $275.00
Click to add this item to cart.
Shipping
  • USPS Priority Return Shipping: $30.00

Description

BMW E series, F series and G series vehicles equipped with the ZF 6HP/8HP transmissions, and the EWS4 system (starting with the E70, X5), the transmission control module (Mechatronic) is mated with the DME, CAS/FEM/BDC modules for the specific vehicle.

When a transmission replacement is required, it is not possible to install a used automatic transmission without affecting the ability of the vehicle to function.

bmw mechatronic

BMW Mechatronics Module

The EWS 4 system will prevent gear selection due to “non-matching” rolling code in the control modules, it is a security function. Your options were buy a new transmission from BMW, 7k plus or part out the vehicle if original mechatronic is damaged.

In the E series vehicles only E70, E71 and E84 models come with EWS security, all other models in the E series can be replaced with a used EGS (Transmission) just by doing coding.

E70 and 71 from 2009+ are fitted with the 8HP, earlier are fitted with a 6HP.

All car models in F/G series come with EWS security for the transmission.

8HP can be virginized for future use and on F/G series can be done remotely

DCT Getrag DKG GEN1 and GEN2 found in E and F series vehicles

BMW EGS Mechatronics 6HP and 8HP EWS Reset

Ex Series 6HP

  • Data refresh – requires programming and coding after refreshing. Requires CAS and key be sent in with mechatronics if you would like us to program/code after refresh.

Ex Series 8HP

  • Data refresh – requires programming and coding after refreshing. Requires CAS and key be sent in with mechatronics if you would like us to program/code after refresh.
  • Cloning – Processing includes: 1:1 copy of the original – requires original and new/used mechatronics unit be sent in.
  • Data refresh – requires programming and coding after refreshing. When original mechatronics is not available. Requires FEM/BDC and key be sent in with mechatronics if you would like us to program/code after refresh.
  • 8HP on F/G series can be done remotely

DCT Getrag DKG GEN1 and GEN2 found in E and F series vehicles including 2019 M2, M3 and M4

  • Cloning – Processing includes: 1:1 copy of the original – requires original and new/used mechatronics unit be sent in.

Shops are always welcomed – On-Site drop off- pickup available

**** THIS IS A PROGRAMMING SERVICE – MECHATRONIC MODULE IS NOT INCLUDED ****




**** PLEASE REMOVE MECHATRONICS MODULE FROM VALVE BODY PRIOR TO SHIPPING ~ ADDITIONAL SHIPPING AND HANDLING CHARGES WILL BE APPLIED TO MODULES STILL ATTACTACHED. Buyer responsible for shipping, you are paying for return shipping. ****

In the unlikely event we are unable to retrieve the data from your old TCU we will refund you the full amount minus return postage.

Mechatronics Removal Instructions

SHIP TO:

Bimmerscan ~ 23512 Commerce Center Dr, Laguna Hills, CA 92653

<< return to services